Go toLog in Go toSign up

Cabinet Stand for 4x2x2 (120 Gallon) Reptile Enclosure

Save 23%
$299.00
$229.99
SKU BLACKAI

Cabinet Stand for 4x2x2 (120 Gallon) Reptile Enclosure

Buying a terrarium is an important investment for your pet's wellbeing. We created this enclosure because we believe that reptile owners should have an economical housing option for their pet. Too many reptiles are kept in inadequately sized enclosures, and one big reason is that enclosures are expensive!

The Reptile Habitats 4x2x2 (120 Gallon) PVC Reptile Enclosure is the perfect way to house your pet reptile:
  • durable PVC panels
  • aluminum frame
  • heavy-duty screen supports up to 40lbs
  • not affected by humidity
  • extremely lightweight (30lbs!)
  • easy to move
  • easy to assemble
  • holds up to 50lbs of décor

This open front terrarium measures 48"L x 24"W x 24"H, which makes it suitable for housing small to medium-sized, terrestrial to semi-arboreal exotic pets such as:

Please keep in mind that small colubrids can escape through the gap between the sliding doors, so this enclosure is not recommended for young colubrids without modification.

VIEW INSTRUCTION MANUAL

---

PRODUCT SPECS

This enclosure is made with an aluminum frame and PVC panels for the bottom, back, and sides that slide into the frame

Shipped flat. Includes a mallet for easy setup. No additional tools are required. A screwdriver can be used to tighten the screws for the light hanging rods and door handles, but do not make them too tight.

1" Stacker/Spacers are now available to stack multiple enclosures (up to 3 high). 

ASSEMBLY NOTES

Reptile Habitats enclosures MUST be assembled on a hard surface. Carpet will not work.

The mounting bars do NOT have to be installed if you do not plan on mounting your lighting.

When assembling your Reptile Habitats terrarium:

  • Be sure to put the top on the correct way with the double track in the front.
  • Be sure to remove the plastic protective layer included on some panels. Use a microfiber towel to remove any dusty appearance. If dust persists it may still have the plastic protective layer.

You can make the structure of the enclosure more secure by using a clear/black aquarium-safe silicone along the base and bottom 1-2” to make it more solid and able to hold substrate. This enclosure is not waterproof. You will need to use silicone to seal the bottom. You can spray the substrate but do not dump water directly into it.

If you lose one, replacement screws for the door handles are easily found at any hardware store. They will be standard hardware that can be used for cabinets in general. A small washer can be added to the screws to make them more secure.

If you add a lot of weight to a PVC panel reptile tank, make sure you support the bottom when moving it.

Acrylic does scratch, so if you are using this enclosure for a reptile with nails the doors will scratch over time. If this is a problem for you, we recommend replacing the acrylic with our pre-cut glass doors!

To increase humidity in the enclosure, you can purchase a 1/8” or 3/16” sheet of acrylic or PVC from your local hardware store to set on top of the screen. However, we do not recommend interfering with your enclosure's built-in ventilation system. Instead, try misting more frequently, using a different substrate, and/or installing a reptile fogger.

---

RETURN POLICY

Only unopened enclosures can be returned at our discretion.

*Regular coupon codes can NOT be applied to enclosures*

 

You recently viewed

Clear recently viewed